03.2020
12/20
H39.MFVRS012EN-01
KFV – Assembly instructions
Multi-point locks, key operated, main lock set
5.4
Change DIN orientation of the soft lock latch or replace the
soft lock latch
1
2
1 x 3.5 mm
There is a slot [1] on the gear box
side. The locking spring [2] of the
latch shank can be opened through
this slot using a slotted screwdriver.
f
Carefully press on the locking
spring of the latch shank
through the opening using the
slotted screwdriver.
The latch shank will be released.
f
Pull out the latch and turn it
180° or replace the existing latch
with the recessed soft lock latch
included in the delivery.
1
Use the new screws enclosed.
The old screws must not be reused.
T 10
1.5 Nm
f
Use the three screws
enclosed [1] to screw the
faceplate and the main lock
into place.
