Siefken SCHOCK DAMON SD4210, Instructions Manual

Page: 22 / 30

3 YEARS
LIMITED WARRANTY
Built to Exceed
6
Wear hearing protection while operating the power tool.
The declared vibration total value has been measured in accordance with a standard test
method and may be used for comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning
The vibration emission during actual use of the power tool can differ from the declared total
value depending on the ways in which the tool is used.
There is the need to identify safety measures to protect the operator that are based on an esti-
mation of exposure in the actual conditions of use (taking account of all parts of the operating
cycle such as the times when the tool is switched off and when it is running idle in addition to
the trigger time).
Standard Accessories
(1) Carbon Brush..............1
(2) Auxiliary handle.........1
(3) Staff Guage..................1
Standard accessories are subject to change without notice.
Optional Accessories (Sold Separately)
1. Through-hole drilling (Ro Hammering)
2. Tine Chisel (Hammering) :18*400mm(SDS max)
3. Flat Chisel (Hammering) :18*400mm (SDS max)
4. Big Flat Chisel (Hammering) :18*400mm (SDS max)