Siefken SCHOCK DAMON SD4210, Instructions Manual

Page: 18 / 30

3 YEARS
LIMITED WARRANTY
Built to Exceed
2
(1) Drill bit
(2) Part of SDS max shank
(3) Hammer rod protector
(4) Flex Sheath
(5) Orientation Staff Guage
(6) Papilionaceous Bolt
(7) Auxiliary handle
(8) Speed Adjuster Knob
(9) Power -ON Indicator
(10) Service Indicator
(11) Function Knob
(12) Cover
(13) Selector
Contents
WARNING Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you
to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets
willreduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increa-
se the risk of electric shock.