OPERATION
WARNING: To reduce the risk of injury, always unplug tool before attaching or removing accessories
or making adjustments. Use only specifically recommended accessories. Others may be hazardous.
WARNING To reduce the risk of injury, wear safety goggles or glasses with side shields.
Paddle Switch Operation
To start the tool, grasp the handle and side handle firmly. Pull the lock-off button back and squeeze
the paddle switch. To stop the tool, release the paddle switch. Make sure the tool comes to a comple-
te stop before laying down the tool. To lock-on the switch, start the tool and push in the lock-on
button. To stop the tool, squeeze and release the paddle switch. Make sure the tool comes to a com-
plete stop before laying down the tool.
OPERATING INSTRUCTIONS
General Operation
1. If you have just installed an accessory or are beginning a period of work, test it by letting it spin for
one minute before applying it to the workpiece. Out-of-balance or damaged accessories can mar
workpiece, damage the tool, and cause stress that may cause accessory failure.
2. Use a clamp, vise or other practical means to hold your work, freeing both hands to control the
tool.
3. Hold tool securely with both hands.
4. Start the tool.
5. Allow accessory to come to full speed before beginning work.
6. Control pressure and surface contact between accessory and workpiece. Too much pressure slows
speed.
7. When finished, turn off the tool and make sure it comes to a complete stop before laying it down.
WARNING
Using Grinding Wheels
To reduce the risk of injury, the operator should be instructed in the use, care and protection of grin-
ding wheels.
Grinding Wheel Selection
Use grinding wheels and accessories that are:
• correct size as written on tool’s nameplate.
3 YEARS
LIMITED WARRANTY
13
