3 YEARS
LIMITED WARRANTY
OPERATING INSTRUCTIONS
Only use accessories with Maximum Safe Operating Speed rated at least equal to the maximum
speed marked on the power tool. This speed is based on the strength of the wheel, allowing for a
reasonable measure of safety. It is not meant to imply a best or most efficient operating speed. Do
not exceed the Maximum Safe Operating Speed.
Installing/Removing Accessories
Make sure the grinding wheel does not extend beyond
the bottom of the guard. Threaded hub grinding
wheels may require a deeper guard (not included).
1. Unplug the tool.
2. Properly position the guard. (Change to 2-sides close guard if using cut-off wheels.)
3. Wipe the flange, flange nut and spindle to remove dust and debris. Inspect the parts for damage.
Replace if needed.
4. Place the flange on spindle, as shown.
5. Place the selected wheel on the spindle and align it with the flange.
6. Position the flange nut over the spindle according to wheel thickness (See Figure 4).
7. Press in the spindle lock button while turning the flange nut clockwise. Tighten securely using a
spanner wrench.
8. To remove wheel, unplug the tool and reverse the procedure.
12
