Siding Tools Industries UK-12, Owner'S Manual

Page: 5 / 28

CUTTING
- 4 -
Cutting Preparation
Slide the profile into the
predefined block for the type of
profile to be cut. Put the blade in
the cutting position by raising the
handle very high to unlock the
mechanism, then down the handle
to cut.
Warning:
Do not put your
fingers against the sharp edge
of the blade at any time.
Cutting Preparation
Before cutting, reposition the pivot
downwards in the working
position. To do this, raise the
handle to its highest and
manipulate the pivot manually.
Warning:
Do not put your
fingers against the sharp edge
of the blade at any time.