26
Assembling onto the Stand
• Position both transport stand brackets onto one bed end, taking care to ensure
the brackets are both orientated in the correct direction (each stand has a marking
showing the correct side).
• Turn both locking collars into the locked position.
• Hook the remaining bed end onto the transport stands.
• Turn both remaining locking collars into the locked position.
• Carefully lift the backrest section and lower the spigots through the larger open
tubes on the side of the transport stand brackets, ensuring the electrics are facing
inwards.
• Carefully lift the leg section and lower the open end onto the vertical tubes,
ensuring the electrics are facing inwards.
• Tighten the hand wheels on the leg section frame.
• Place the clevis pins through the backrest section and secure with the ‘R’ clips and
spacers.
• Ensure all cabling is neatly wrapped around the relevant bed sections and is not
dragging on the floor or under excess tension.
The bed must never be moved on the transport stand with the locking
collars in the unlocked position or if missing.
Warning
