10
6. SYMBOL DEFINITION
The following symbols are found on this bed:
Warning
Beware of potential hazard
Refer to instructions for use - Recommended
Failure to read the instructions for use could introduce a hazard
Place of manufacture
W.E.E.E Label - Found on individual parts of electrical system
(Waste Electrical and Electronic Equipment) Refer to section 15
Safe working load
Refer to section 4.3
Class II electrical device
The user / occupant is protected by at least two layers of insulation between the current
carrying parts (e.g. control box and mains cable) and the metal accessible parts – If damage
is noticed to any electrical component, turn off at the mains and contact your provider or
Sidhil Ltd. immediately.
Mattress suitability
Refer to section 17
Type B Applied Part
Applied Part: The parts of the bed that come into physical contact with the user / occupant
in order for the bed to carry out its intended function (refer to section 16.2 for a list of
applied parts).
Type B: Applied parts complying with specific requirements for protection against electric
shock (IEC 60601-1: 2005) and that can be immediately released from the patient.
Detachable side rail suitability
Use of an incorrectly specified side rail could introduce a hazard
Refer to instructions for use - Mandatory
Failure to read the instructions for use could introduce a hazard
Maximum patient weight
Refer to section 4.3
