2
SXP80/185T & SXP100/185T External stern thruster assembly
1.0.2 - 2016
Technical specifications
............................................................. 2
Planning & important precautions.............................................. 3
Stern thruster installation considerations................................... 3
Bolt on installation .................................................................... 4
Installation measurements..........................................................5
Electrical installation ................................................................. 6
Control panel and control-leads................................................. 7
Visual wiring diagram ................................................................ 8
Technical wiring diagram .......................................................... 9
Electrical installation of stern thruster systems ..........................9
Important user precautions ...................................................... 10
How to use Side-Power thrusters ............................................ 11
Maintenance ............................................................................ 12
Troubleshooting ....................................................................... 13
Warranty statement ................................................................ 14
Checklist .................................................................................. 15
Parts list ................................................................................... 15
Service centres ....................................................................... 16
Contents
Motor:
Custom made reversible DC-motor, 12 or 24 Volt
Motor output:
SXP80/185T: 4,4kW SXP100/185T: 6kW
Gearhouse:
Seawater resistant bronze. Ballbearing at propellershaft; combination of ballbearing and slide bearing at
driveshaft.
Motor bracket:
Seawaterresistant aluminium.
Ignition protection:
Conforms to ISO 8846
Propeller:
5 blade skew "Q"-propeller
, fibreglass reinforced composite.
Batteries:
Minimum recommended battery capacity (cold crank capacity by DIN standard)
SXP 80/185T 12V : 550 CCA DIN/1045 CCA SAE
SXP 80/185T 24V : 300 CCA DIN/570 CCA SAE
SXP 100/185T 12V : 750 CCA DIN/1425 CCA SAE
SXP 100/185T 24V : 400 CCA DIN/760 CCA SAE
Max. use:
Up to continuous run time depending on load. Remaining run time shown on control panel.
Safety:
Electronic time-lapse device protects against sudden change of drive direction. Electric thermal cut-off switch in
electromotor protects against overheating (auto reset when electromotor cools down).
Flexible coupling between electro-motor and driveshaft protects electromotor and gearsystem if propeller gets
jammed.
PJC panel shuts of automatically 5 minutes after last use (factory default). This interval can be adjusted in 5 min
steps up to 60 minutes or turned off completly. The PPC Speed Control unit wil turn off motor power each time
main solenoids is activated. This removes any possibility for solenoid lock in. Any fault in the main solenoids will
give feed back to the panel and turn off power to the electric motor.
Technical specifications
DECLARATION OF CONFORMITY
We,
Sleipner Motor AS
P.O. Box 519
N-1612 Fredrikstad, Norway
declare that this product with accompanying
standard remote control systems complies with the
essential health and safety requirements according
to the Directive 89/336/EEC of 23 May 1989
amended by 92/31/EEC and 93/68/EEC.
Max. stern thickness: 100mm (80mm recommended)
