Side-Power SH SERIES, User Manual

Page: 7 / 24

7
6032 3 2019
-
SEP user manual
AC Thrusters:
Hydraulic Thrusters:
Retractable Thrusters:
DC Thrusters:
Motor temperature indicator.
Hydraulic oil temperature indicator.
Symbol shown when the thruster deploys. Symbol shown when the thruster retracts.
Symbol shown when the thruster is in position OUT.
When the thruster is deployed and no input is given
via the joysticks/buttons over a 10 second period,
the panel will give an audible signal every 10th
second to tell that the truster is still deployed.
Battery indicator.
From 8.5V to 12V for 12V thrusters,
15V to 24V for 24V thrusters
Motor temperature indicator.
From 70°C/ 158°F to 130°C/266°F.
Battery indicator.
From 8.5V to 12V for 12V thrusters,
15V to 24V for 24V thrusters
Motor temperature indicator.
From 70°C/ 158°F to 130°C/266°F.
Symbol shown when a DC Thruster is
used in a dual bow or dual stern setup:
Proportional Thruster Display Symbols
EN
MC_0053
Thrust power and direction, Bow thruster(s)
Input from bow joystick on this panel.
The thrust indicator will be shown in this position on a single
joystick panel if the thruster is defi ned as a bow thruster
Indicating amount of thrust set by other control units in the system, i.e additonal
PJC panels, 8700 Retract panel, input via 8730 S-link external switch interface,
S-link remote control etc.
If two or more units are set to run the thruster in
opposite direction, this information will not be shown.
Thrust power and direction, Stern thruster(s)
Input from stern joystick on this panel
The thrust indicator will be shown in this position on a single joystick panel if the
thruster is defi ned as a stern thruster.