3
PJC-211
1.1.1 - 2012
DISPLAY IN NORMAL USE:
Bow thruster information
Remaining run
time of thruster
based on the
electric motors
heat at present.
As bars empties
you have less run
time left.
Thrust power
and direction
Battery sup-
ply performance
based on deliv-
ered voltage to
thruster. As the
battery empties,
you have less
power and less
run time left
FIRST TIME SETUP
After installation of a S-link thrusters system, a SCAN SYSTEM procedure to setup control panels, thrusters and
additional equipment must be completed before the system can be used.
SPECIFIC INFORMATION WHEN USED IN A SYSTEM
WITH SR-SERIES RETRACTABLE THRUSTERS
Symbol shown when the thruster deploys
Symbol shown when the thruster retracts
Indicating amount of thrust set by other control units
in the system, i.e additonal PJC-212/211 panels, 8700
Retract panel, input via 8730 S-link external switch
interface (remote control, foot switches etc.)
If two or more units is set to run the thruster in
opposite direction, this information will not be shown.
Alarms are ignored for 3 seconds after turning panel
ON.
