User’s manual TM200B
9
6.
OPERATING THE GRINDER
Always follow safety instructions related to bench grinders.
Prior to starting the grinder, make sure you are familiar with control devices.
Make sure the tightening torque applied to the fixing nuts of wheels is correct. Check the condition of the wheels before
using them (See section 7.5 « Replacing a wheel»).
Prior to any servicing or maintenance, always unplug the grinder.
Always wear convenient Personal Protective Equipments.
When continuously operating the grinder, be careful with the surface of the grinder, because of the risk of burn.
6.1.
ASSEMBLYING
Wheel side :
1.
Fix the spark screen (8) to the wheel guards (1 and
6) and adjust it so that the distance from the
periphery of the wheel is max. 5 mm.
2.
Fix the transparent protection shield (7) to the
spark screen (8) and adjust it so that the operator
is protected.
3.
Fix the tool-holder (10) to the wheel guards (1 and
6) and adjust it so that the distance from the
periphery of the wheel is max. 2 mm.
4.
Because of wear, the wheel diameter
decreases and these distances increase.
As the wheel wears out, the spark screen and the tool-holder should be regularly adjusted to maintain the distance from
the periphery of the wheel.