SICK WLG16 Bluetooth, Operating Instructions Manual

Page: 9 / 131

Test → M Test → L+
+ (L+)
Test
– (M)
+ (L+)
Test
– (M)
7 Commissioning
1 Alignment
Align the sensor with a suitable reflector. Select the position so that the red emitted light
beam hits the center of the reflector. The sensor must have a clear view of the reflector,
with no object in the path of the beam [
figure 1 ]. You must ensure that the optical open‐
ings of the sensor and reflector are completely clear.
Figure 1: Alignment
2 Sensing range
Adjust the distance between the sensor and the reflector according to the corresponding
diagram [
see figure 2 ].
Distance in m (feet)
Sensing range
1
2
3
4
5
6
0 1
(3.28)
2
(6.56)
3
(9.84)
4
(13.12)
5
(16.4)
6
(19.69)
4
2.8 0
2.5
0
3.5 0
5 0
1.2 0
0
Figure 2: Maximum distance between the sensor and the respective reflector type
1
Reflector PL10F CHEM
2
Reflective tape REF-AC1000 (50 x 50 mm)
3
Reflector PL10FH-1
7
COMMISSIONING
8
8020349.14CS | SICK
Subject to change without notice