SICK WLA16P, Operating Instructions Manual

Page: 22 / 162

WLA16x-xxxxxx30 WLA16x-xxxxxx31 WLA16x-xxxxxx32
1
2 3
6
1
2 3
5
6
1
2 3
4
6
1
BluePilot blue: alignment aid
2
LED yellow: status of received light beam
3
LED green: supply voltage active
4
Press-turn element: time function adjustment
5
Teach pushbutton: adjustment of light/dark switching
6
Teach-Button: adjusting the sensitivity
4 Mounting
Mount the sensor and the reflector using suitable mounting brackets (see the SICK
range of accessories). Align the sensor and reflector with each other.
Note the sensor’s maximum permissible tightening torque of < 1,3 Nm.
5 Electrical installation
The sensors must be connected in a voltage-free state. The following information must
be observed, depending on the connection type:
– Male connector connection: Note pin assignment.
– Cable: wire color
Only supply/switch on the voltage once all electrical connections have been estab‐
lished.
Explanations on connection diagram:
Alarm = alarm output
Health = alarm output
MF (pin 2 configuration) = external input, teach-in, switching signal
Q
L1
/C = switching output, IO-Link communication
Test = test input
U
B
: 10 ... 30 V DC
Table 8: Connections
Wxx16x- x4 xH x5 xI
1 = BN
2 = WH
3 = BU
4 = BK
5= GY
2 1
4 3
0.14 mm 2
AWG26
2 1
4 3
5
0.14 mm 2
AWG26
4
MOUNTING
22 O P E R A T I N G I N S T R U C T I O N S | WLA16 8020348.1DS6/2021-11-24 | SICK
Subject to change without notice
en