Photoelectric proximity sensor
Operating instructions
1
safety notes
■
Read the operating instructions before commissioning.
■
Connection, mounting, and setting may only be performed by trained specialists.
■
Not a safety component in accordance with the EU Machinery Directive.
■
Power supply: Class 2
UL Environmental Rating: Enclosure type 1
■
When commissioning, protect the device from moisture and contamination.
■
These operating instructions contain information required during the life cycle of
the sensor.
2
Correct use
The WT24-2 is an opto-electronic photoelectric proximity sensor (referred to as "sensor"
in the following) for the optical, non-contact detection of objects, animals, and persons.
If the product is used for any other purpose or modified in any way, any warranty claim
against SICK AG shall become void.
3
Operating and status indicators
Photoelectric proximity sensor with background suppression.
1
5
(0
.5
9
)
2
6
(1
.0
2
)
6
1
(2
.4
0
)
ma
x. 3
2
(1
.2
6
)
27
(1.06)
10
(0.39)
M5
8
7
.5
(
3
.4
4
)
4
.7
(0
.1
9
)
11.8
(0.46)
30
(1.18)
65
(2.56)
1
2
8
9
1
4
(0
.5
5
)
6
.5
(0
.2
6
)
14
(0.55)
17.5
(0.69)
7
3
4
5
6
1
4
,4
(0
.5
7
)
9
Figure 1: Dimensional drawing
1
Alignment sight
2
LED signal strength indicator
3
Standard direction of the material being detected
4
Center of optical axis, sender
5
Center of optical axis, receiver (close range)
8008784.Z474 | SICK
Subject to change without notice
5
