Technical Information
Chapter
1
TiM51x
About this document
8016425/YZK8/2016-07-07
©
SICK AG · Germany · All rights reserved · Subject to change without notice
2
1
About this document
This document summarizes supplementary information on
mounting
and
electrical instal-
lation
as well as
measured value output fomat
of the TiM51x.
It is aimed at sufficiently qualified personnel for the purposes of installation, commissioning
and further data processing.
Notes on commissioning, configuration and maintenance can be found in the TiM51x oper-
ating instructions.
Information on the TiM51x can be found on the Internet on the TiM51x product page at
www.sick.com/tim51x
:
Technical specifications in the online data sheet (PDF)
Dimensional drawing and 3D CAD dimension models in various electronic formats
Range diagram (PDF)
EC Declaration of Conformity (PDF)
Configuration software SOPAS ET
(
www.sick.com/SOPAS_ET
)
Product information with overview of available accessories (PDF)
TiM51x operation instructions (PDF) in additional languages where applicable
This technical information (PDF)
Support is also available from your sales partner, see
www.sick.com/worldwide.
Symbols used
Certain information in this documentation is emphasized as follows to enable faster access
to the information:
NOTICE
Notice!
A notice indicates potentially damaging hazards or functional impairments to the TiM51x or
its connected devices.
WARNING
Warning!
A warning indicates specific or potential dangers to the user's physical integrity. It is intend-
ed to protect the user against accidents.
The safety symbol to the left of the warning indicates the type of accident hazard e.g. due
to electricity. Increasing warning levels (CAUTION, WARNING, DANGER) indicate the severity
of the possible hazard.
Always reading warnings carefully and obey them meticulously.
Important
This important notice informs you about special aspects.
This symbol refers to supplementary technical documentation.
