2
Safety information
2.1
Intended use
The 2D LiDAR sensor TiM1xx is an intelligent sensor for invisibly detecting objects in
areas (fields) to be monitored. It is designed for mobile or stationary use indoors in
standalone operation, with a scanning range of up to 3 m (TiM10x) or 10 m (TiM15x).
The device features a configurable detection field, the shape of which can be freely
defined. If the device detects that the field has been breached, it signals this at the
digital output.
SICK AG assumes no liability for losses or damage arising from the use of the product,
either directly or indirectly. This applies in particular to use of the product that does not
conform to its intended purpose and is not described in this documentation.
2.2
Improper use
Any use outside of the stated areas, in particular use outside of the technical specifica‐
tions and the requirements for intended use, will be deemed to be incorrect use.
•
The device does not constitute a safety component in accordance with the respec‐
tive applicable safety standards for machines.
•
The device must not be used in explosion-hazardous areas, in corrosive environ‐
ments or under extreme environmental conditions.
•
Any use of accessories not specifically approved by SICK AG is at your own risk.
WARNING
Danger due to improper use!
Any improper use can result in dangerous situations.
Therefore, observe the following information:
■
Product should be used only in accordance with its intended use.
■
All information in the documentation must be strictly observed.
■
Shut down the product immediately in case of damage.
2.3
Limitation of liability
Relevant standards and regulations, the latest technological developments, and our
many years of knowledge and experience have all been taken into account when
compiling the data and information contained in these operating instructions. The
manufacturer accepts no liability for damage caused by:
■
Non-adherence to the product documentation (e.g., operating instructions)
■
Incorrect use
■
Use of untrained staff
■
Unauthorized conversions or repair
■
Technical modifications
■
Use of unauthorized spare parts, consumables, and accessories
2.4
Modifications and conversions
NOTICE
Modifications and conversions to the device may result in unforeseeable dangers.
SAFETY INFORMATION
2
8020631/1DWW/2022-08 | SICK
O P E R A T I N G I N S T R U C T I O N S | TiM1xx
7
Subject to change without notice
