90˚
90˚
2
r
s
b
Position the brackets near the ends of the housing. For devices with a protective
field height > 300 mm, the distance between the bracket and the end of the
housing must not exceed 1/4 of the length of the housing. If the device is exposed
to strong vibrations during operation, mount the top bracket at a height where the
offset in the safety light curtain housing rests on the bracket. (
3
)
3
b
Observe the tightening torque details for the particular bracket. Higher torques
may damage the bracket. Lower torques do not offer sufficient protection against
slipping of the sender and receiver. (
4
)
4
2,5 Nm -
3,5 Nm
2,5 Nm -
6 Nm
5
MOUNTING
32
O P E R A T I N G I N S T R U C T I O N S | senSe2
8027557/2022-11-11 | SICK
Subject to change without notice