SICK RSB, Operating Instructions Manual

Page: 36 / 184

0
0 40
(1.57)
160
(6.30)
80
(3.15)
120
(4.72)
–10
(–0.39)
–20
(–0.79)
10
(0.39)
20
(0.79)
Distance in mm (inch)
mm (inch)
2 1 3
Figure 7: Active light beam width
1
Black, 6%
2
Gray, 18%
3
White, 90%
7.2 Sensing range adjustment
Sensing range is not able to be set. The sensor has been adjusted to the maximum
sensing range by the factory and is ready for operation.
7.3 Additional functions
IO-Link
The sensor can be used in standard I/O mode (SIO) or IO-Link mode (IOL). All automa‐
tion functions and other parameter settings are effective in IO-Link mode and in stand‐
ard I/O mode (exception: Time stamp). Output of binary switching signals in standard
I/O mode via pin 4 / black wire and via pin 2 / white wire.
Information on the IO-Link functions can be found in the enclosed IO-Link photoelectric
sensor operating instructions or downloaded from
www.sick.com under the device part
number.
8 Troubleshooting
The Troubleshooting table indicates measures to be taken if the sensor stops working.
Table 7: Troubleshooting
LED/fault pattern Cause Measures
Green LED flashes IO-Link communication -
Digital outputs not according to
graphic
table 14
1. IO-Link communication
2. Change of the configura‐
tion
3. Short-circuit
1. None
2. Adjustment of the con‐
figuration
3. Check electrical connec‐
tions
Yellow LED lights up, no object
in the path of the beam Excessive background remis‐
sion / Light emission (optics)
is dirty. Check the background for
highly reflective Objects /
Cleaning of the optical surfa‐
ces.
OPERATING INSTRUCTIONS
36 O P E R A T I N G I N S T R U C T I O N S | RSB - Roller Sensor Bar 8027085/2022-05-31 | SICK
Subject to change without notice
en