SICK outdoorScan3 EtherNet/IP 1094471, Mounting Instructions

Page: 10 / 16

All rights reserved. Subject to change without notice.
1 About this document
This document applies to the outdoorScan3 safety laser scanner and the associated
system plug with the following part numbers:
Safety laser scanner Safety laser scanner without
system plug System plug
• 1094472 • 1094471 • 2102812
Symbols and document conventions
A , B References to the figures at the end of this document are indi‐
cated by a black background.
2 Safety information
DANGER
Hazard due to lack of effectiveness of the protective device
In the case of non-compliance, it is possible that the dangerous state of the machine
may not be stopped or not stopped in a timely manner.
b
Please observe the safety notes provided.
The safety laser scanner is not suitable for the following applications, among others:
• Underwater
• In explosion-hazardous areas
The device must be protected from environmental influences by means of a weather
hood or other suitable measures. More information can be found in the operating
instructions.
For more information about how to work with the protective device, refer to the machin‐
ery documentation or the operating instructions for the protective device.
You can call
up the EU declaration of conformity and the current operating instructions for the pro‐
tective device by entering the part number in the search field at
www.sick.com (part
number: see the type label entry in the “Ident. no.” field).
3 Device overview
Overview: A
1
Optics cover
2
Display
3
Keypad
4
USB port
5
Status LEDs
6
Additional LEDs for ON state and OFF state
7
Network LEDs
8
Safety laser scanner without system plug
9
System plug
ß
Cover plate
The USB connection (USB 2.0 Mini-B, female connector) may only be used temporarily
and only for configuration and diagnostics.
MOUNTING INSTRUCTIONS
10 M O U N T I N G I N S T R U C T I O N S | outdoorScan3 – EtherNet/IP™ 8023259/160E/2019-11-14 | SICK
Subject to change without notice