7
Transport and storage
7.1
Transport and storage conditions
When transporting the fully assembled cylinders, ensure that the cable and male con‐
nector of the built-in sensor are not subjected to tensile loads.
The cylinders must be stored in a dry place. When storing the cylinders on top of one
another, ensure no male connectors or cables are crushed.
Cover the connectors any free cable ends with an anti-static bag. The original packag‐
ing, for example, is suitable for this purpose. The dust protection caps of the connector
system can also be reused during storage.
For part numbers for the original packaging and the dust protection caps, see:
.
7
TRANSPORT AND STORAGE
26
T E C H N I C A L I N F O R M A T I O N | MAX48
8021473/2017-08-08 | SICK
Subject to change without notice
