Annex
94
© SICK AG · Division Auto Ident · Germany · Subject to change without notice
8013796/UL20/2010-09-27
Operating Instructions
Laser Measurement Systems of the LMS500 Product Family
Chapter
10
10.2.12 Start the device/logout
The device is returned to the measurement mode after configuration.
Request
Message structure:
sMN
Run
Answer
Message structure:
sAN
Run
ErrorCode
Example
Request:
<STX>sMN{SPC}Run<ETX>
Answer:
<STX>sAN{SPC}Run{SPC}0<ETX>
Message part
Description
Variable type
Length
(byte)
Value range
Type of command
Request (SOPAS method by name)
string
3
sMN
Command
Start the device
string
3
Run
Message syntax XXV:
Request “Start device”
Message part
Description
Variable type
Length
(byte)
Value range
Type of command
Answer (SOPAS answer)
string
3
sAN
Command
Start the device
string
3
Run
ErrorCode
The command has been accepted
if the error code 0 is returned.
Bool
1
0
error
1
no error
Message syntax XXVI:
Answer to the “Start device” request
Summary of Contents for LMS500-20000 PRO Indoor
Page 1: ... ...
