![background image](http://html.mh-extra.com/html/sick/lector620/lector620_operating-instructions-manual_1264269004.webp)
8014640/ZMG2/2017-05-12
• Subject to change without notice • SICK AG • Waldkirch • Germany • www.sick.com
4
LeCtor62x | SICK
setup and function
NOTE
risk of damaging the swivel connector
¾
¾
the plug unit may be moved up to 180° from end
point to end point of the stop. the eCo variant has
no swivel connector.
Device structure Lector620 with swivel
connector
Re
ad
y
Re
ad Diag
n
Re
sult
Te
achI
n
LE
D
Auto
-Setup
Data
Auto
fo
cu
s
LNK TX
Userdefine
d
300 200 100 70 40
100
0
[mm]
[%
]
1
2
3
5
a
4
1
6
7
8
9
ß
á
à
â
26.5
35.6
6
10
4.
8
21.5
26
43
71
17.44
Ø 10
Fig. 6: Structure of Lector620 Professional, High Speed,
DPM Plus and oCr. All dimensions in mm.
1.
M5 blind tapped holes, 5 mm deep (4 x), for mounting the
Lector620
2.
“ethernet” connection (female connector, M12, 4-pin,
D-coded)
3.
“Power/Serial Data/CAN/I/o” connection (male connec-
tor , M12, 17-pin, A-coded)
4.
M5 sliding nuts, 5 mm deep (2 x), for mounting the
Lector620 (alternative)
5.
Swivel connector
6.
reading window
7.
Function button (2 x)
8.
Bar graph display
9.
RGB LEDs for status indication (2 modes), 5 x
ß
Cover (flap)
à
USB port, female connector, Micro B type, 5-pin
á
Slot for microSD memory card
â
LeD for microSD memory card
Device structure icr620D-t51503
(part number 1064256)
See downloadable dimensional drawing on the SICK
product page in the web. Path:
www.sick.com/Lector62x
> Select device > tab “tech-
nical data” > Section “technical drawings”
Device structure Lector620 with cable outlet
Re
ad
y
Re
ad Diag
n
Re
sult
Te
achI
n
LE
D
Auto
-Setup
Data
Auto
fo
cu
s
LNK TX
Userdefine
d
300 200 100 70 40
100
0
[mm]
[%
]
1
2
1
3
4
5
6
8
7
9
26.5
35.6
6
10
4.
8
43
21.5
26
71
Ø 10
Fig. 7: Structure of Lector620 eCo. All dimensions in mm.
1.
M5 blind tapped holes, 5 mm deep (4 x), for mounting the
Lector620
2.
M5 sliding nuts, 5 mm deep (2 x), for mounting the
Lector620 (alternative)
3.
reading window
4.
Function button (2 x)
5.
Bar graph display
6.
RGB LEDs for status indication (2 modes), 5 x
7.
Cable (0.9 m) with male connector, D-Sub HD, 15-pin
(“Power/Serial Data/CAN/I/o”)
8.
Cover (flap)
9.
USB port, female connector, Micro B type, 5-pin
Lighting unit
1
3
2
1
1
1
1
2
1
ECO variant
Fig. 8: Lighting unit
1.
Integrated lighting = 4 x LED (2 x left/2 x right);
ECO variant: 2 x LED (2 x left)
2.
Feed-back spot (e.g. for Good Read) = 1 x green LED
3.
Aiming lasers for alignment, can be deactivated = 2 x red
laser LeDs
the eCo variant has no aiming laser.
status indicators, functions
Ready
Read Diagn
Result
TeachIn
LED
Auto-Setup
Data
Autofocus
LNK TX
Userdefined
300
200
100
70
40
100
0
[mm]
[%]
O
O
O
O
O
Fig. 9: LeD status indicators, function buttons and bar
graph display
status indicators in read mode
Display
LeD
color
status
ready
O
Green
Device ready to read
O
red
Hardware or software error
result
O
Green
read operation successful
O
red
read operation unsuccessful
LeD
O
Green
read mode: Illumination on,
internal reading gate open
Data
O
Yellow Data output via host interface
LnK tX
Ö
Green
Data traffic via Ethernet
O
= illuminated;
Ö
= flashing
tab. 3: Status indicators in read mode
Status indicators in configuration mode
Display
LeD
color
status
read
Diagn
O
Blue
test (reading diagnostics)
selected
Ö
Blue
test started
teachin
O
Blue
teach-in selected (default:
Match code)
Ö
Blue
teach-in started
O
Green
teach-in successful
O
red
teach-in unsuccessful
(match code default setting:
unable to teach in any code)
auto-
setup
O
Blue
Auto-Setup selected
Ö
Blue
Auto-Setup started
O
Green
Auto-Setup successfully quit
O
Yellow Auto-Setup was partially suc-
cessful
O
red
Auto-Setup was unsuccessful
auto fo-
cus (not
with
the ecO
variant)
O
Green
Function can be defined by
user
O
Yellow Function can be defined by
user
O
Blue
Function can be defined by
user
O
red
Function can be defined by
user
O
= illuminated;
Ö
= flashing
tab. 4: Status indicators in configuration mode
audible status indicator (beeper)
Signals a selectable event (default: Good read). User
operations are accompanied by a series of sounds.
Can be switched off
Functions
For information on operation of functions, see
&
Online help for device in configuration software
SOPAS ET.
read Diagn (read diagnosis)
Percentage analysis: the device records a series of
images and uses the current reading performance
settings to decode them. the read rate of the last 10
read operations is displayed in % using the bar graph.