3
PRODUCT DESCRIPTION
10
Operating Instructions | InspectorP Rack Fine Positioning
8024534 / 16UW / 2020-02-26
Subject to change without notice
3
Product description
3.1
Scope of delivery
The scope of delivery includes the following components:
No. of
units Component
Remarks
1
Device in the version ordered
V2D63xP-xMx
SC
xx (single deep
applications)
or
V2D63xP-xMx
SE
xx (single and double
deep applications)
2
Sliding nut with 5.5 mm-deep M5
threaded mounting hole
Positioned in the slot on the right side of
the device on delivery.
Alternative mounting option for the device
instead of tapped blind hole. Use in pairs.
1
Hexagon key WAF 2
For manual actuation of the focus screw.
4
Label (round, self-adhesive)
Protects the focus setting when using an
S-mount lens. Adjustment is performed
using the manual focus screw. The label
is stuck over the access opening for the
focus screw on the top of the device.
1
Printed safety notes, multilingual
Brief information and general safety
notes.
3.2
Function and use
Temperature-, load- and steel construction-dependent influencing variables generate
varying geometric conditions at transfer points in the storage and conveyor technology.
These conditions make safe automated positioning of automated storage and retrieval
systems more difficult when putting in and removing load carriers from storage.
InspectorP Rack Fine Positioning supports precise positioning when putting in and
removing load carriers from storage. In doing so, positioning processes can be
controlled both for single deep applications as well as combined applications with
single and double deep racks. The device is mounted to the automated storage and
retrieval system. The device takes pictures when putting goods into and taking them
out of storage and detects a hole or a round reflector as a positioning mark in the rack.
Using this positioning mark, the device sends a deviation of the current position of the
Figure 1: Negative influencing variables during automated positioning processes
