![background image](http://html.mh-extra.com/html/sick/icd890/icd890_technical-information_1264317010.webp)
Activities
Qualification
Electrical installation,
device replacement
■
Practical electrical training
■
Knowledge of current electrical safety regulations
■
Knowledge of the operation and control of the devices in their
particular application
Commissioning, configura‐
tion
■
Basic knowledge of the Windows
TM
operating system in use
■
Basic knowledge of the design and setup of the described con‐
nections and interfaces
■
Basic knowledge of data transmission
■
Basic knowledge of 1D technology (bar code) or 2D technology
(matrix code)
Operation of the device for
the particular application
■
Knowledge of the operation and control of the devices in their
particular application
■
Knowledge of the software and hardware environment for the
particular application
2.7
Operational safety and particular hazards
Please observe the safety notes and the warnings listed here and in other chapters of
this product documentation to reduce the possibility of risks to health and avoid dan‐
gerous situations.
LED radiation of the ICI890 illumination unit
Products with type code ICI890-2xxxx (LED color: visible red light) operate with an LED
illumination unit of risk group 1.
CAUTION
Optical radiation: LED risk group 1, visible radiation, 400 nm to 780 nm
The LEDs may pose a danger to the eyes in the event of incorrect use.
■
Do not look into the light source intentionally.
■
Do not open the housing. Opening the housing will not switch off the light source.
Opening the housing may increase the level of risk.
■
Comply with the current national regulations on photobiological security of lamps
and lamp systems.
Products with type code ICI890-1xxxx (LED color: visible blue-white light), ICI890-3xxxx
(LED color: visible white light) and ICI890-4xxxx (LED color: visible blue light) operate
with an LED illumination unit of risk group 2.
CAUTION
Warning! Optical radiation: LED risk group 2, visible radiation, 400 nm to 780 nm
Potentially dangerous optical radiation. Can be damaging to the eyes.
■
Do not look into the light source for extended periods of time.
■
Never point the light source at people.
■
Avoid any reflections on people from reflective surfaces. Be particularly careful
during mounting and alignment work.
■
Do not open the housing. Opening the housing will not switch off the light source.
Opening the housing may increase the level of risk.
■
Comply with the current national regulations on photobiological security of lamps
and lamp systems.
2
SAFETY INFORMATION
10
T E C H N I C A L I N F O R M A T I O N | Camera ICD890 Generation 4
8023775/18IM/2020-07-02 | SICK
Subject to change without notice