5
Mounting
5.1
Safety
DANGER
Hazard due to unexpected starting of the machine
Death or severe injury
b
Make sure that the dangerous state of the machine is and remains switched off.
DANGER
Bypassing the protective device
Hazard due to lack of effectiveness of the protective device
b
Eliminate any temptation to tamper with the safety locking device by taking at least
one of the following measures:
°
Attach safety switches with a cover or with shielding, or ensure they are out of
reach.
°
If possible, use permanent mounting methods for actuators (e.g., welding,
glue, disposable screws, or rivets).
NOTICE
If incorrectly installed or the ambient conditions are not suitable, the safety locking
device can get damaged.
b
Arrange the safety switch and actuator so that damage due to unintentional out‐
side influences is prevented.
b
Do not use safety switch and actuator.
b
The set-up and mounting of the safety switch and actuator must be stable enough
to maintain proper operation.
b
Use only reliable mounting elements that can only be removed with tools.
b
If an opening is created in the physical guard due to alignment errors, it must not
impair the protective function.
5.2
Converting the actuating head
1.
Loosen screws on the cover and lift the cover.
2.
Loosen the catch on the actuating head.
3.
Turn the actuating head by 180°.
4.
Engage actuating head.
5.
Tighten the screws to 1.2 Nm.
6.
Seal unused actuation slots with the supplied slot covers.
MOUNTING
5
8020553/10NO/2019-05-14 | SICK
O P E R A T I N G I N S T R U C T I O N S | i14 Lock
13
Subject to change without notice