1
ArchiTech Mortise Lock & Surface-Mounted Networx Control Unit Mounting and Installation Instructions
ArchiTech
™
by Networx
™
FOR MORTISE LOCKS USING SURFACE-MOUNTED NETWORX CONTROL UNITS
MOUNTING AND INSTALLATION INSTRUCTIONS
© NAPCO Security Technologies, Inc. 2016
WI2090B 09/16
DESCRIPTION
These instructions detail the hardware installation procedure for the ArchiTech
mortise door locks
using the
Surface-
Mounted Networx Control Units
for hollow metal and solid wood doors.
Installation instructions for the
Door Contact Sensor
,
Door Contact Magnet
(installed in the door jamb) and the
Oval
and
Rectangular Proximity Readers
are also included.
PARTS OVERVIEW
For reference, the images in Fig. A below display each component (not to scale). In addition to the various screws
included with your mortise lock, please be aware that two types of
Proximity Readers
are available (either
Oval
or
Rectangular
) but only one type is included with your lock. Furthermore, one of two types of
Door Contact
Magnets
(installed in door jamb) are included (either 3/8" or 3/4" diameter). We recommend taking the time to
read through these instructions, find and familiarize yourself with each component before you begin your installation.
As detailed in the instructions that follow, the
Proximity Reader
wires, the
Door Contact Sensor
wires and the
Mortise
Lock Motor Wire
are routed through the door and are plugged into the
Surface-Mounted Networx Control
Unit
. The
Mortise Lock Motor Wire
can easily be routed within hollow metal doors. For solid wood doors, a
Mortise Drill Jig
(part #
N95I1DJ
)
must
be used to drill a hole pathway within the solid wood door to route the
Mortise Lock Motor Wire
.
REQUIRED TOOLS
In addition to the standard door prep kit tools used to install a mortise lock into a metal or wood door (Phillips and flat
head screwdrivers, etc.), you will need: A small
level
, and the following drill bit sizes:
5/8"
,
3/8"
,
3/4"
and
7/64"
.
IMPORTANT:
For installation on UL Listed Wood Fire Doors fill the through hole wire passage with UL Clas-
sified Fire Stop Sealant after connecting all wiring and testing the Lock.
FIG. A: OVERVIEW OF BASIC PARTS (NOT TO SCALE)
OVAL AND RECTANGULAR
PROXIMITY READER COVERS AND
MOUNTING COMPONENTS
MORTISE DRILL JIG
(
N95I1DJ
)
(SOLID WOOD DOORS ONLY)
DOOR CONTACT
MAGNET
(TWO TYPES)
OR
"SURFACE-MOUNTED" NETWORX
CONTROL UNIT
AND ITS MOUNTING PLATE
DOOR
CONTACT
SENSOR
