+
–
Figure 1: Operating element: sensitivity setting
5
Mounting
Mount the sensor and the reflector using suitable mounting brackets (see the SICK
range of accessories). Align the sensor and reflector with each other.
max. 90 Nm
Note the sensor’s maximum permissible tightening torque of 90 Nm.
6
Electrical installation
The sensors must be connected in a voltage-free state (U
V
= 0 V). The following informa‐
tion must be observed, depending on the connection type:
–
Male connector connection: pin assignment
–
Cable: wire color
Only apply voltage/switch on the voltage supply (U
V
> 0 V) once all electrical connec‐
tions have been established. The green LED indicator lights up on the sensor.
Explanations of the connection diagram (following tables):
Q /
Q
= switching outputs
n. c. = not connected
4
OPERATING AND STATUS INDICATORS
6
8021183.1ABM / 2020-12-21 | SICK
Subject to change without notice
Summary of Contents for GRL18SV
