SICK G2F, Operating Instructions Manual

Page: 9 / 101

0
Sensing range
2 650
1
2
3
Sensing range typ. max.
8
(0.31)
16
(0.63)
24
(0.94)
32
(1.26)
40
(1.57)
35 28
1
2 320 35 29
35 30
1
Sensing range in white, 90 % remission
2
Sensing range on gray, 18 % remission
3
Sensing range on black, 6 % remission
Distance in mm (inch)
Figure 6: Sensing range 30 mm
4 5
6
Figure 7: Description of the sensing range areas
Table 3: Sensing range areas
Sens‐
ing
range
/
object
color -Xxx4x
6
-Xxx1x
6
-Xxx3x
6
4
0 ... 1 mm 0 ... 1 mm 0 ... 1 mm
5
/
1
1 ... 9 mm 1 ... 18 mm 1 ... 35 mm
5
/
2
2 ... 9 mm 2 ... 18 mm 2 ... 35 mm
5
/
3
2 ... 9 mm 2 ... 18 mm 2 ... 35 mm
Use see table 2, page 7 to check the function. If the switching output fails to behave in
accordance with the table, check the application conditions. See section Fault diagnosis.
3 Sensing range setting
Sensor which it is not possible to set: The sensor is adjusted and ready for operation.
8 Troubleshooting
The Troubleshooting table indicates measures to be taken if the sensor stops working.
Table 4: Troubleshooting
LED indicator/fault pattern Cause Measures
Yellow LED does not light up
even though the light beam is
aligned to the object and the
object is within the set sensing
range No voltage or voltage below
the limit values Check the power supply,
check all electrical connec‐
tions (cables and plug connec‐
tions)
Voltage interruptions Ensure there is a stable power
supply without interruptions
TROUBLESHOOTING
8
8023328.18HX | SICK
Subject to change without notice
9