96
FLOWSIC200 · Operating Instructions · 8013271/1CJ9/V2-0/2022-01 · © SICK Engineering GmbH
Commissioning and parameterization
4.4.2
Menu structure
Fig. 88
Menu structure LC display (shown for FLOWSIC200 H)
4.4.3
Configuring
4.4.3.1
MCU
Analog outputs / inputs
Set the MCU to “Maintenance” mode and select the “I/O Parameter” submenu.
Select the desired parameter and enter the default password “1234” using “^” (scrolls
from 0 to 9) and/or “
→
” (moves the cursor to the right) buttons.
Select the desired value using “^” and/or ”
→
” buttons and write it to the device with
“Save” (confirm twice).
1): as in the operating mode
2):
3):
1
2
}
1
}
3
