manualshive.com logo in svg

SICK Flexi IO XTDO1, Operating Instructions Manual, Page: 11 / 44

Share
Download
SICK Flexi IO XTDO1 Operating Instructions Manual Download Page 11

3.2

Overview of the module

1

2

3

4

I3
I5

Q1

Q7

I4
I6

Q2

Q8
A2

I7

Q3
Q5

A1

I8

Q4
Q6

I2

PW

R

I1

5

Figure 2: FLX3-XTDO1 IO expansion module

1

Release element of the module

2

Status indicators (LEDs)

3

Front connector unlocking

4

Front connector with terminals

5

Backplane bus

3.3

Configuration and function

Prerequisites

•

The module can only be operated with a main module.

Configuration

Table 2: Interfaces of the module

Description

Quantity

Safety capable inputs

8

Safety capable outputs

8

RJ45 female connector

Function

The module is a safe digital input/output expansion module.

The module offers the following functions:

•

Monitoring of the connected safety devices

•

Switching of the connected safety devices

•

Special IO functions (e.g., fast shut off)

Complementary information

•

Safety outputs have test pulses for detecting short-circuits in the wiring.

•

Voltage is supplied to the module via the backplane bus. Communication with the
main module of the safety controller also occurs via the backplane bus.

•

Voltage is supplied directly to the safety outputs Q via A1 / A2 on the module.

PRODUCT DESCRIPTION 

3

8024583/2020-11-10 | SICK

O P E R A T I N G   I N S T R U C T I O N S | Flexi IO XTDO1

11

Subject to change without notice

Summary of Contents for Flexi IO XTDO1













































Reviews:

No comments