8014753/ZVZ7/2018-03-22 • © SICK AG • Subject to change without notice 59
Operating instructions Distance measuring device DL100 Pro – RS-422
Operation via Ethernet (Ethernet interface)
9.2.3
Measurement values
Field "Visualisation of
measurement values"
Parameter
Description
X-Scale
Enter X-axis for graphic display of the distance value.
Read/Write access
• Read and write
Unit
• s
Y min / Y max
Enter minimum and maximum value for the Y-axis.
Read/Write access
• Read and write
Unit
• m
Auto-Scale Y
Click the button "Auto-Scale Y" to adjust the display to the
current measurement values.
Read/Write access
• Read and write
Unit
• m
Table 28:
Page "Measured data" – field "Visualisation of measurement values“
Field "Measurement values"
Parameter
Description
Distance
Measurement value "Distance" after filter, corrections and
offset.
Read/Write access
• Read only
Unit
• m
Velocity
Measurement value "Speed".
Read/Write access
• Read only
Unit
• m/s
Acceleration
Measurement value "Acceleration".
Read/Write access
• Read only
Unit
• m/s
2
Table 29:
Page "Measured data" – field "Measurement values"
