Online Help
Chapter
2
Barcode Scanner CLV62x
CLV62x
8011967/S345/2008-04-23
©
SICK AG · Division Auto Ident · Germany · All rights reserved
37
Output 2
The digital output 2 is configured with the parameters of the
group.
Important
This connection is only available on the bar code scanner with a cable connector (standard
version) and for the Ethernet version via the CDB620 connection module in combination
with the parameter memory module CMC600.
External output 1
group to configure the digital external ouput 1
of the CDB620 connection module in connection with the CMC600 parameter memory
module or of the connection module.
External output 2
group to configure the digital external ouput 2
of the CDB620 connection module in connection with the CMC600 parameter memory
module or of the connection module.
Beeper
The beeper is configured with the parameters of the
group.
Parameter
Function
Output 2
Select condition that is to trigger a signal at output 2.
Logic
Select logic level of the selected output 2.
Control
Select type of control.
Duration
Enter signal duration.
If applicable, select unit.
Parameter
Function
Output 1
Select event that is to trigger a signal at the external output 1.
Logic
Select logic level of the selected external output 1.
Control
Select type of control.
Duration
Enter signal duration.
If applicable, select unit.
Parameter
Function
Output 2
Select event that is to trigger a signal at the external output 2.
Logic
Select logic level of the selected external output 2.
Control
Select type of control.
Duration
Enter signal duration.
If applicable, select unit.
Parameter
Function
Beeper
Select condition which is to trigger the beeper.
Volume
Select the beeper volume.
