■
The device must only be mounted using the pairs of blind tapped holes provided
for this purpose.
■
Mount the device in a shock and vibration insulated manner.
Equipment required
■
Mounting device (bracket) with sufficient load-bearing capacity and suitable
dimensions for the device.
■
2 M5 screws – the maximum screw-in depth in the device is 5 mm from the
housing surface.
■
Tool and tape measure
The screws are for mounting the device on mounting equipment (bracket) supplied by
the user. The screw length required depends on the mounting base (wall thickness of
the bracket).
NOTE
The scope of delivery of a SICK bracket already includes the right screws for mounting
the device to the bracket.
5.2.2
Mounting device
The device is mounted to the bracket via at least two M5 tapped blind holes. The blind
tapped holes are located in pairs on both of the narrow sides of the device,
.
SICK brackets
The device can be installed using optional SICK brackets or customer-specific brackets.
SICK offers prefabricated brackets which are optimally suited for the mounting of the
device in a wide range of applications. See:
•
Example: The design of the bracket with adapter plate supports many different installa‐
tion variants, for example, as well as the alignment of the device in two axes.
Figure 9: Mounting example of a device with mounting bracket with adapter plate
User-supplied brackets
Bracket requirements:
■
Stable mounting device
–
Orientation of the device changeable in the x- and y-axis
–
The mounting device must be able to bear the weight of the device and
connecting cables without shock.
MOUNTING
5
8017840/19OF/2021-10-28 | SICK
O P E R A T I N G I N S T R U C T I O N S | CLV61x
27
Subject to change without notice
