1.
Mount the lower alignment bracket so that the threaded hole faces up and the
head of the lock screw faces down.
2.
Rotate the alignment bracket as far to one side as possible. Secure the alignment
bracket on the open side by screwing the first M8 screw into the through hole.
3.
Rotate the lower alignment bracket to the other side. Secure the alignment
bracket using the second M8 screw.
4.
Mount the upper alignment bracket so that the threaded hole faces down and the
head of the lock screw faces up.
5.
Rotate the upper alignment bracket as far to one side as possible. Secure the
alignment bracket on the open side by screwing the first M8 screw into the
through hole.
6.
Rotate the upper alignment bracket to the other side. Secure the alignment
bracket using the second M8 screw.
Figure 11: Mounting the safety light curtain using the alignment brackets: Steps 1 to 6
7.
Using 6 to 8 revolutions, screw the two M8 screws for mounting the lower end of
the explosion-proof enclosure into the lower alignment bracket. Make sure you
leave enough space between the screws and the alignment bracket for the lower
end of the explosion-proof enclosure.
Figure 12: Mounting the safety light curtain using the alignment brackets: Step 7
8.
Position the explosion-proof enclosure on the two screws so that the mounting
holes are directly over the partly-tightened screws.
MOUNTING
3
8022867/2019-03-04 | SICK
O P E R A T I N G I N S T R U C T I O N S | C4000 Fusion Ex
17
Subject to change without notice