3
Product description
3.1
Product characteristics
The device is an interface coupler, which can be used to connect connected devices
(e.g. WLL180T) to a PROFINET IO network. The relevant devices are connected via a
simple plug system on the side of the coupler.
Usually, the entire system is mounted on a mounting rail close to the application.
The coupler supports up to 16 connected devices, which are likewise connected to one
another via the plug system.
Further properties:
•
PROFINET IO device
•
Option to communicate via function block (e.g. Siemens SFB52 or SFB53)
•
2 Ethernet ports with transmission speed of 10 or 100 MBaud
Further specifications can be found in the technical data (
).
3.2
Setup and function
1
2
3
6
5
4
1
Bus male connector (system bus)
2
Service port
3
Power supply connection (M8), 4-pin
4
D-coded M12 connector, 4-pin, PROFINET / Ethernet
5
D-coded M12 connector, 4-pin, PROFINET / Ethernet
6
Status LEDs
3.3
Interfaces
3.3.1
PROFINET
1
4
3
2
Table 2: PROFINET pin assignment
Pin
Pin assignment
1
Tx+
2
Rx+
3
PRODUCT DESCRIPTION
8
O P E R A T I N G I N S T R U C T I O N | WI180C-PN
8023551/11HP/2019-03-07 | SICK
Subject to change without notice
