8017035/ZMO9/2017-06-08 • © SICK AG • Subject to change without notice.
41
Operating the Sensor
5.4.1
Graph Items (Area 1 to area 4)
You can use the graph display settings to configure the following items.
Setting
item
Bank Setting value/
default value
General description
Graph
scale
Y
Expand or shrink the display time axis (the horizontal axis).
1 to 6
[
1
]
Graph
range
Y
Expand or shrink the measured value display range (the vertical axis).
0 to 6
[
0
]
Span
Y
Set a span (multiplier) on the measured values.
0.001 to 1.999
[
1.000
]
Average
Y
Set the number of times over which to perform the moving average of the measured values.
1 to 1023
[
32
]
[Unit: Number of times]
Hold
Y
Select the measured result hold operation.
None
The measured result will be output as-is. (Hold input will be ignored.)
Sample
The measured value during hold input will be output.
Peak
The maximum value during the hold input period will be output.
Bottom
The minimum value during the hold input period will be output.
Reference: For details on the graph display settings, see “7.7 Calculation Settings.”
