![background image](http://html1.mh-extra.com/html/sick/2113101/2113101_operating-instructions-manual_1264685027.webp)
5.3
Mounting
The sender and receiver are mounted using suitable mounting brackets that can be
obtained as accessories from SICK. The sender and receiver are then aligned with each
other.
Important information
NOTE
b
Read this section in full before mounting the brackets.
b
Read the information on aligning the sender and receiver,
DANGER
Hazard due to lack of effectiveness of the protective device
Persons or parts of the body to be protected may not be recognized or not recognized in
time in case of non-observance.
b
Take account of the minimum distances calculated for the machine:
mum distance from the hazardous point", page 13
,
.
b
Mount single-beam photoelectric safety switch in such a way that nobody can pass
under the light beam or pass by the side of the protective device.
Complementary information
Suitable accessories are available at
. Enter the product part number in
the search field (part number: see the type label entry in the “Ident. no.” field). All suit‐
able accessories are listed on the Accessories tab of the product page.
MOUNTING
5
8024678/2020-01-24 | SICK
O P E R A T I N G I N S T R U C T I O N S | L25
27
Subject to change without notice