MR
PW
R
MR
PW
R
MR
PW
R
MR
PW
R
f
f
fi
MR
PW
R
f
fi
si
s s
1x
3 - 5 sec
(very long)
Reset
measu-
ring
range to
default
setting
Action not preformed if button is released before
request time start
Reset Menu
Action preformed if button is
released within request time
Action not preformed if button is
released after request time end
0 sec
1 sec
1.2 sec
3 sec
5 sec
time
LED behaviour
Off
On
Slow blink
Inverted slow blink
Fast blink
Inverted fast blink
* end positions can only be teached seperately.
After teaching one end position the menu is left.
For teaching the second end position menu has
to be entered again.
Measuring range
successfully reseted
Figure 9:
Dynamic Teach
teach routine
8.3.2
Manual Teach
Manual Teach
is used to manually teach in the two end points of the measuring range using the teach-in button.
Both end points are taught in separately. The
Out-Of-Range
display is activated here.
OPERATION
8
8025941/2020-07-16 | SICK
O P E R A T I N G I N S T R U C T I O N S | MPS-G with analog output
23
Subject to change without notice
