Further topics
•
7.6.3
Inputs and outputs, local
Overview
On the
Inputs and outputs, local
page, you will find an overview of the connections of the
safe multibeam scanner. You can configure the following settings:
•
Selection of the signal for the Uni-O universal output
•
Selection of the signal level (Hi/Lo) for the Uni-O universal output
•
Selection between PNP and NPN mode for the OSSD pair
•
Setting the restart delay for the OSSD pair
Figure 25: Inputs and outputs, local
1
Connection overview: System connection of the safe multibeam scanner
2
Connecting cable with pin assignment
3
Available signals
4
Remove signal from connection
5
Further settings for some signals
Connection overview
The Safety Designer displays the safe multibeam scanner and the system connection.
Connecting cable
The Safety Designer displays the system connection and its individual pins.
CONFIGURATION
7
8025936/2021-01-08 | SICK
O P E R A T I N G I N S T R U C T I O N S | scanGrid2 I/O
53
Subject to change without notice
