SICK IVP IVC-3D 200 Operating Instructions Manual Download Page 13 | Manualshive

Page: 13 / 40

SICK IVP IVC-3D 200 Operating Instructions Manual Download Page 13

Operating Instructions

Chapter

3

IVC-3D

8011007

SICK IVP • Industrial Sensors • www.sickivp.com • All rights reserved

13

Functional Overview

3.2

IVC Studio

IVC Studio is used for developing the programs that are used by the cameras when

performing

inspections

– that is, analyzing images. IVC Studio can handle both 2D and

3D cameras.
When you develop a program in IVC Studio, you work with a

product

. A product in IVC

Studio is a great help for handling all the

devices

(usually cameras), programs and tables

that are needed for a certain inspection.
The product contains a list of the used devices, and copies of all programs and tables that

are used by the devices. Normally, each device has one program and one table associated
to it, which is also the program and table that are currently in the working memory.
To be able to work with a program in IVC Studio, it must be associated with a device. A
program is always executed on a device – and never on the computer. The computer is

mainly used for building and modifying the programs on the devices, and to display the
results sent from the devices.

Product

Devices

Camera1

FillLevel

FillTable

Label

LabelTable

Camera2

Camera3

Programs

Tables

<<

uses

>>

3.2.1

Programs in Development and Production

During development, you build the program in IVC Studio but the program is automatically
downloaded to the associated device.
When a program (or program step) is executed it is executed in the camera, and the results
are sent back to IVC Studio where they are displayed.

Program steps

Table values

Images

Result values

«
...
11
12
13
14
15
...
»

Summary of Contents for IVC-3D 200









































Reviews:

No comments