www.sibotech.net
21
value, if select “Keep-Alive”, then send keep-alive message; If not, then disconnect the TCP connection. The
function is only valid when ENB-302MT is Modbus TCP server.
Limitation of communication IP range —— Set the range of communication IP to limit the client to
connect to ENB-302MT.
Note: After configuring parameters, users need click “OK” button to write the configuration to the equipment. If
you do not want to write to the configuration, click “Cancel” button.
4.4 Locate
When the user manage multiple ENB-302MT, you can use “Locate” function determine equipment that you
want to configure
。
Users click on the “Locate”, and the equipment is in Ethernet, the orange light of the equipment will flash 3
seconds then the user can find it.
4.5 Remote reset
The function of “remote reset” is restarting the selected device. Select the equipment in the list first, click
“Remote reset” button, it will pop up a confirmation dialog, then click “OK” to complete the operation.
Summary of Contents for ENB-302MT
Page 29: ...www sibotech net 29...
