② Open the IE browser and input the default address of IP-Cam and connect. The IE
browser will download Active X control automatically.
**IMPORTANT: You must configure IE Internet options before the Active X control will
install. Proceed to do the following in Internet Explorer:
Click on Tools (cog wheel top right corner) > Internet Options > Security > Click Custom level
> Scroll to
DOWNLOAD UNSIGNED ACTIVEX CONTROLS >
set it to
PROMPT
>
Click OK.
③ After downloading Active X control, the login dialog box will pop up.
④ Input the default username and password and then enter to view camera, and
access camera settings.
1.2
WAN
➢
Access through the router or virtual server
① Make sure the camera is well connected via LAN and then log in to the camera via
LAN and go to Config
Network Config
Port menu to set the port number. **Note: Only
change the ports if there will be more than
Port Setup