Click the information of the camera listed in the above table to show the network
information on the right hand. Modify the IP address and gateway of the camera and
make sure its network address is in the same local network segment as the computers.
Please modify the IP address of your device according to your local network
configuration.
For example, the IP address of your computer is 192.168.1.4. So the IP address of the camera
shall be changed to 192.168.1.
X
. After modification, please input the password of the
administrator and click “Modify” button to modify the setting.
☞
④ Double-click the IP address and the system will pop up the IE browser to connect
IP-CAM. IE browser will auto download the Active X control. After downloading, a login
window will pop up as shown below.
Input the username and password to log in.
☞
The default password of the administrator is “
123456
”.
The default username is “
admin
”; the default password is “
123456
”.