14
Operation
The temperature setting range for this product is 40
°
C to 200
°
C. Operate the instrument within this
range.
(1)
After switching the power ON, the startup screen is displayed for about 4 seconds. Then
the display changes to the operating mode screen and starts controlling the temperature to
the set temperature (set to 40
°
C when shipped).
•
The operating mode screen shows the current temperature of the heating table in the [PV]
area and the set temperature in the [SV] area.
(2)
Change the temperature setting as desired by pressing the up or down button. After a few
seconds, the instrument registers the new temperature setting and begins controlling the
temperature accordingly.
•
Holding the button down causes the value to increase or decrease more rapidly.
After setting the temperature, confirm that the [OUT1] lamp is illuminated (red) and the current
temperature increases.
Held for 1 to 10 seconds:
1
°
C increments
Held for 10 to 20 seconds:
10
°
C increments
Held for over 20 seconds:
100
°
C increments
After about
4 seconds
[Operating Mode Screen]
Current
temperature
Set
temperature
[Startup Screen]
Example: Changed to 100
°
C
Several seconds later
Illuminated
Temperature controlling starts
