manualshive.com logo in svg

siat SM446 HS, Instruction Manual And Spare Parts List

Share
Download
siat SM446 HS Instruction Manual And Spare Parts List Download Page 2

ENGLISH 

April 2013

2

AUTOMATIC CASE SEALING MACHINE WITH DRIVE SIDE BELTS 

- Maximum box size:

h.

650 mm x 

w.

650 mm x 

l

800 mm

- Minimum box size:

h.

150 mm x 

w.

160 mm x 

l

300 mm

- Adhesive tape: 

w.

50/70 mm

- Belt speed: 30 m/min.

- Production: 11 boxes/minute 

- Average air consumption: 260 Nl/min approximately

Instruction manual for the use, maintenance, safety, shipment, storage, unpacking, set-up, repairing, trouble shoo-

ting, spare parts and disposal  concerning the case sealing machine model SM446 HS.

This publication is property of SIAT S.P.A.

Via Puecher, 22 - 22078 TURATE (CO) - ITALY 

Tel. 02-964951 - Fax. 02-9689727

Edition: April 2013   

The reproduction of this manual is strictly forbidden. 

All rights reserved ©Siat S.p.A. 2013

The manufacturer reserves the right to modify the product at any time without notice.

Publication n. 

SBC0023374

Version 0

SIAT

S.p.A. 

- Via Puecher, 22 - 22078 TURATE (CO) ITALY - P.O. BOX 1 

Tel. 02-964951 - Telefax 02-9689727

http://www.siat.com - E-Mail: [email protected]

SM446 HS

Summary of Contents for SM446 HS







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands