siat SM446 HS, Instruction Manual And Spare Parts List

Page: 11 / 102

ENGLISH
April 2013 11
3-SAFETY
Label code: 3.0.01097.96A
Label code: 3.0.01028.96A
Label code: 3.0.01024.96A
Before starting any maintenance operations the elec-
trical power must be disconnected.
Show the sharp knife on the taping head.
Tape threading path for bottom taping unit and posi-
tion of the sharp knife.
a
b
c
SYMBOLS
COLOURS
DANGER AND PARTS IN MOVEMENT
COMPULSORY ACTIONS/PROHIBITION
CONTROLS AND INFORMATION
YELLOW COLOUR
RED COLOUR
LIGHT BLUE COLOUR
3.11 TABLE OF WARNINGS, LABELS, PLATES AND DRAWINGS TO BE FOUND ON THE MACHINE
3.10 PREDICTABLE ACTIONS THAT ARE INCORRECT AND NOT ALLOWED
- Never try to stop or hold the box while it is being driven by the belts.
Use only the EMERGENCY STOP BUTTON.
- Never work without the safety protections.
- Never remove or disable the safety devices.
- Only authorised personnel should be allowed to carry out the adjustments, repairs or maintenance which re-
quire operation with reduced safety protections. During such operations, access to the machine must be re-
stricted. When the work is finished, the safety protections must immediately be reactivated.
- The cleaning and maintenance operations must be performed after disconnecting the electric power.
- Clean the machine using only dry cloths or light detergents. Do not use solvents, petrochemicals etc.
- Do not modify the machine or any part of it. The manufacturer will not be responsible for any modifications.
- We advise to apply directly to Siat for modifications.
- Follow carefully the installation instructions of this manual.
The manufacturer will notbe responsible for damages caused by improper installation.