ENGLISH
September 2010
30
9-OPERATION
IMPORTANT!
If, for any reason, the box should stop inside the machine after 10 seconds the machine stops.
To remove the box and restart operate as follows:
-press the E-stop,
--open the safety guard
-remove the box,
-close the safety guard an release the E-stops,
-press the AUXILIARIES push-button;
-press the RESET push-button,
-press the START button to start the cycle
9.3
OPERATION METHODS
The SM44-HD works only in automatic: safety guard closed, E-stop released, START button pressed, air
circuit open.
9.3.1. AUTOMATIC OPERATING MODES
-Unchanging box size
(selector switch
10
on
1
pos.): the machine acknowledges the size of the first box.
The upper unit maintains its position along whole production.
Introducing a box of different size with consequent machine jam the same stop after 10 seconds with ac-
tivation of the’‘cycle time out’‘ warning light on the control board.
-Automatic
(selector switch
10
on
2
pos.): the machine acknowledges the box size whenever a new box are
placed on the infeed conveyor belt.
-Transit only
(selector switch
10
on
3
pos.): upper taping unit out of operation; the box is sealed only on the
bottom side.
Removing the bottom taping unit the boxes can be simply moved inside-outside; a useful condition when
the sealing machine is placed in a automatic packaging line.
9.4.
STOP METHODS
9.4.1. NORMAL STOP
STOP push button
6
on control board panel: the push-button must be
pressed at the working cycle end.
To restart press RESET
4
then START
5
.
9.4.2. EMERGENCY STOP
Lockable E-stops pressed or safety guard open. They stop the machine at
any point of the cycle; also pneumatic circuit are disconnected.
To restart release the E-stops and close the sfatey guards as necessary
and then:
-press AUXILIARIES
3
push-button
-press RESET
4
push-button,
-press START
5
push-button.
3
5
4
6
2
2
Summary of Contents for SM446-650-HD
