e005 OLIMPO
ver. 00
User’s manual
pag. 19 di 29
Printed in
e005-di OLIMPO (eng).doc
Siap+Micros S.r.l.
constant
value
A
Any numerical value (
instant data in alarm
of the parameter mentioned).
If the value is acquired wrongly from an electrical angle, would be replaced by the
characters "*".
constant
value
V
If the threshold of alarm or prealarm identified by the Id is that it has overcome the
instant value.
Therefore, a
block
that represents an
Alarm
of the measurement parameter could be structured like this:
id + “,” + T + “,” + v “,” + W + “,” + v “,” + A + “,” + v “,” + V + “,” + value_4
The four sections do not have to be positioned in a precise order, however, it is advisable to position as
shown above.
1.17.3 TERMINATOR
Finally, the terminator is a field which identifies the end of the record format. The
terminator
is made up of
characters "#" (ASCII 35) + a number indicating the total number of
fields
of records between the
first header
"
ST
" and the
terminator
"#" included. For example #
50
indicates that the record is composed of total of 50
fields with the
header
"
ST
" and the
terminator
"#" included.
1.17.4 An example of the record format of Data in Alert
The monitoring station N°2 interrogated on the 4
th
February 1996 at 13.45 transmitted a
record format
of
D
ata in Alert
like the following:
ST02 , 6 , 13.45 , 04 , 02 , 96 , 2 , M01 , 10 , T , 0 , W , 2 , A , 13.5 , V , 10 , #18
section_1
section_2
section_3
section_4
