Home
/
Si-tex
/
GPS-95CP
/
User Manual

Si-tex GPS-95CP, User Manual

The Si-tex GPS-95CP offers incredible navigation capabilities. To make the most of this device, download the free user manual from our website. This comprehensive manual provides step-by-step instructions for setup and operation, ensuring a seamless experience with the Si-tex GPS-95CP. Access the manual at manualshive.com.

Share

Page: 46 / 57

$background image$

- 46 -

Installation

Drill  a  1/4  in.  diameter  hole  at  each  marked  location.  Mount  the  GPS-95CP(i)  display  bracket
using bolts through the mounting surface. Place large flat washers on the opposite side of the
mounting surface from the bracket and then install lock washers and nuts. Tighten securely.

Install  the  display  unit  into  the  mounting  bracket.  Check  alignment  and  operation  of  the  pivots
and  security  of  the  mounting.  Make  any  adjustments  necessary  to  prevent  binding  and  assure
even meshing of the pivot locking washers. It is advised to remove the display unit and store it
in a safe place to prevent damage during the rest of the installation process.

- Power Connection

Power is supplied to the GPS-95CP(i) Charting System through a connector on the rear panel of
the display unit.
Route the power cable from the GPS-95CP(i) location to the ship’s power distribution panel.
Connect the black wire to a battery negative (-) terminal of the power panel.
Connect the red wire to a fused battery positive (+) terminal of the power panel (12 to 36 Vdc
nominal). If a fused terminal is not available, install an in-line fuse holder. (1 amp)

«
...
44
45
46
47
48
...
»

Summary of Contents for GPS-95CP


























































Reviews:

No comments

Related manuals for GPS-95CP

Brand: V7 Pages: 8

Brand: OVERWATCH Pages: 14

Brand: Garmin Pages: 4

Brand: Maxcom Pages: 16

Brand: BAGTAG Pages: 12

Brand: Maestro Pages: 18

Brand: G Sat Pages: 23

Brand: Siemens Pages: 4

Sitraffic Sensus Unit C3077

Brand: Siemens Pages: 32

Brand: Sony Pages: 2

GPS-CS1 - Digital Camera GPS Unit

Brand: Sony Pages: 1

Brand: Sony Pages: 15

Brand: Sony Pages: 16

Brand: Sony Pages: 25

NAV-U NVD-U13E NAV-U NVD-U13R

Brand: Sony Pages: 51

Brand: Sony Pages: 56

GPS-CS1 - Digital Camera GPS Unit

Brand: Sony Pages: 59

Brand: Sony Pages: 75

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands